How to clean the crystal chandelier? Precautions for Cleaning Crystal Lamps

Crystal chandelier is very strong in decorative effect. Large shape and complex shape are one of the characteristics of crystal chandelier. It will inevitably accumulate some dust after hanging on it for a long time. In order to keep it clean, we need to clean it regularly. The specific time can be determined according to the situation. So how to clean the crystal chandelier? What are the precautions for cleaning crystal lamps?
How to clean the crystal chandelier?
As for the cleaning of crystal lamps, there is no imaginary complexity. Before cleaning, we need to do some preparatory work. For example, prepare the cleaning spray special for crystal lamp, which is easy to get in the exclusive store, and the price is not expensive. It is much easier to use it than to scrub it with clean water. Just spray it on the surface of the crystal lamp and wait quietly. When the cleaning agent evaporates, it will take away the dust on the surface of the crystal lamp, which is very convenient and easy. If you already have detergent, skip the first step.
If the cleaning is not clean, it is better to remove the crystal lamp and let it soak in clean water. Then you can use the detergent. As long as it is not damaged, you can wash it anyway. After the water stain on the lamp is completely dry, you can install the crystal lamp.
If you really can't buy detergent, you can do it in other ways. For example, use some long and soft brushes, preferably some brush type, do not use paint brushes. The longer the better, gently rub back and forth on the surface of the crystal lamp, friction will generate static electricity to take the dust away. Then wipe the remaining stubborn dust off the surface of the crystal lamp repeatedly with a wet soft cloth.
If you encounter those stains that can not be cleaned with clean water, you can only change kerosene, kerosene can dissolve some water-insoluble stains, it is easy to clean up. Generally, it is the crystal lamp used at home that is cleaned. First, a small bowl with a shallow bottom is filled with about two-thirds kerosene. Then, the parts above the crystal lamp are carefully removed, soaked in kerosene for a few minutes, and then taken out and wiped with clean cotton cloth. But how can the crystal lamp soaked in kerosene hang back directly? It is more appropriate to clean kerosene completely with mild soap water and hang back the crystal lamp washed with soap water with clear water.
Secondly, when the crystal lamp is clean, if you want to clean it thoroughly, you need to disassemble the parts. Is there a way to clean it without disassembly? It's OK to use a special detergent for crystal lamps. In the process of spraying, the floating dust of crystal ball and crystal wafer will be taken away with the volatilization of liquid. This method is very easy and fast. In the use process, we should use some soft cloth, dip in some water diluted by detergent, gently wipe the front and back, and pay attention not to damage the lamp vigorously.
Precautions for Cleaning Crystal Lamps:
1. When cleaning bead string (especially upper and lower pull-down nets) it is found that the bead string is twisted, it should be adjusted to achieve flat effect. If it is connected by flat "butterfly buttons", pay attention to the front side of the buttons should be uniformly outward, and the interface should be inward, so that it can be beautiful and uniform. It is found that the connection of beads is rusty and discolored, and it is better to change it conveniently if the bead string is connected by a flat "butterfly button". Defects should be repaired in time.
2. Do not rotate the lamp body when cleaning the lamp body in order to avoid loosening of the screw teeth and causing unsafe accidents. At the same time, check the firmness of the lamp body connectors, find that the screw loose should be tightened freely, and the screw thread with slippery teeth should be replaced immediately to ensure safety.
3. When cleaning crystal chandeliers, you must wear cotton gloves to avoid leaving fingerprints or sweat stains on the crystal.
4. When disassembling the crystal ball, it is better to replace the hardware on the crystal ball, such as pins and other things, so as not to cause unnecessary scratches on the crystal pendant lamp and roll to the ground. If all the beads are to be removed and cleaned, large lamps should pay attention to the balance of the lamp body when disassembling the beads, and do not disassemble the other side after disassembling. When the lamp body is tilted and the lamp body or outer frame is deformed, it should be disassembled around and around.
5. Hardware on the lamp holder must not be wiped with a towel that will shed hair, and clean crystal balls should be wiped clean with a towel with strong water absorption. If there is no dry water, it will lead to oxidation and rust of the crystal lamp holder.